Fine Bubble Tube Diffusers – AFTN 31000- 91 mm Tube

- - SSI Provides special materials such as PTFE-coated surface layers, EPDM, as well as Integral register prevents cantilevered diffusers from axial rotation around the header pipe.
  - 100ºC temperature resistance and environmentally friendly ABS adapter with 60ºC resistance for PVC supporting tube.
  - Individual thermocouples in each cavity of compression mould = 100% quality control.
  - Low membrane plasticizer content to reduce shrinkage and hardening, but enough to avoid creep.
  - Multiple integral check valves keep your aeration piping system clean.
  - Highest possible SOTE independently tested per ASCE and lowest possible head loss.
  - Compression moulded EPDM membranes have very tight wall thickness tolerances, a long track record and exhibit even air distribution and minimal shrinkage over time.
  - One-piece light weight but strong ABS adapter with PVC supporting tube makes handling during installation very easy.
  - Double orifice on top & bottom centre line of pipe and installed membrane will act as a check valve to prevent backflow.
  - SSI Provides Highest possible quality and technology with many years of trouble-free Efficient operation.
  - Reinforced and coated ultra-fine bubble membranes, offer outstanding chemical and fouling
  - Resistance, in addition to the highest oxygen transfer efficiency.